If you’re looking to mod your regular Xbox 360 controller, there are a few things you’ll need before getting started. First, you’ll need some tools - a Phillips head screwdriver and a soldering iron are both good choices. Second, you’ll need some materials - either a controller shell or an old Xbox 360 controller. Finally, you’ll need to know how to mod a controller. To start, remove the screws that hold the controller shell together. You can do this by using a Phillips head screwdriver or by using a flathead screwdriver and prying them out with your fingers. Once the screws are removed, carefully pull the shell off of the controller. Next, take your soldering iron and heat up one of the wires that connects the left analog stick to the motherboard. Once it’s hot, touch it to one of the screws on the motherboard and wait until it cools down before doing the same thing with the other wire. Once both wires have been soldered onto the screws, replace the motherboard into its rightful place in the controller shell and reattach it with screws. Now that your controller is modded, all you have to do is install whatever custom software or hardware you want to use on it. There are many options available online, so be sure to do some research before making any decisions. ..
